It’s a scorching summer day in Dubai; thankfully, you have facilitated air conditioning in your own home. Air conditioning plays a huge part for all homeowners or even more in corporate office places, but often the most frustrating thing that can occur is the malfunction or breakdown of the air conditioning unit. Thus, it’s significant to confirm your AC unit is working or cooling correctly as predicted. However, occasionally, a simple reset of the air conditioning unit can solve common problems like warm air blowing out in place of cool air.

Thus, you just need to read this comprehensive blog will explain about 3 Easy Ways to Reset an Air Conditioning Unit. And what would you need to reset your AC unit?

Why Need to Reset Air Conditioning Unit?

Like every electrical appliance, an air conditioning unit system has its protection circuit breaker. The protection circuit breaker, which is often generated for the duration of a power loss, is designed to prevent electrical accidents by, for example, immediately shutting it down when an overload is detected, so averting explosions and fires. Resetting your air conditioner is therefore essential to getting it to function again when the protective circuit breaker usually trips.

An other scenario is that an offender may experience a thermostat malfunction, in which case a straightforward reset will resolve the problem. Additionally, when the thermostat is set to cool, an air conditioner that is only blowing warm air can be fixed with a manual reset.

Then, it’s a great option for those persons looking for an easy-to-use AC unit, and resetting your unit should be your primary way of acting.

3 Easy Ways to Reset an Air Conditioning Unit: When It’s Not Working Properly, Cold Air Flowing?

Here are 3 easy ways to reset an air conditioning unit that you can consider to get your AC working again.

Way 1: Reset the Circuit Breaker or AC by the Isolation Switch

Every home’s electrical panel has circuit breakers for all the electrical circuits, including a particular one for your heating & cooling system. So that you reset your home’s circuit breaker or AC by using the isolation switch.  In most cases, when the AC won’t turn on or has problems following a power surge or outage, rebooting the AC isolator or isolation switch is ideal.

To do this, follow this step:

First, find the electrical circuit breaker or isolation switch; it is designated for your HVAC system. If the circuits are not noticeable, you might have to work out on your own which switch controls your HVAC. Once you locate it, then turn off the circuit breaker and leave it for at least 30 minutes up to an hour. This will permit the electrically operated components in the air conditioner unit to reset. You can activate it by flipping the isolation switch after half an hour. returning After turning on the air conditioner, check to see if it is operating as it should or if the thermostat is set to cool the unit appropriately.

In case the AC unit still doesn’t work, then the isolation switch might be faulty, and you will need to go through the next reset method.

Way 2: Press the Reset Button

Most air conditioners have a reset button to assist you in solving small mechanical troubles at whatever time they happen. So, if your AC model has a reset control. Then you can use the e-button to solve any small faults in the system that also recommend methods by professionals. The tiny red reset label button is frequently located on or near the external condensing unit.

Follow the below-given steps to reset an AC using the reset button:

• Turn off your AC unit and unplug it from the power source for safety purposes.
• Find the reset button, a small button located near or around the outside unit.
• Turn off the circuit breaker that powers your AC.
• Press and hold down the reset button for at least 10-12 seconds.
• After that, you can release the reset button.
• Turn on your AC unit and plug it back into the power source.
• Then, observe if the AC is working properly or the thermostat is set to cool.
• Select a temperature slightly lower than the current indoor temperature.

In case you find that your AC is still not functioning or working properly after you have tried the reset button method. So, then you can follow the next method.

Way 3: Unplug the Air Conditioner Unit:

Is your air conditioning system still not functioning or performing right? Then the next AC reset technique is very helpful for you to reset an AC unit.

First, locate the shutoff panel close to the outside unit and turn off the power to the compressor.

Then, unplug your AC from all the power source boards and leave the unit unplugged for a minimum of at least 30 minutes.

After 30 minutes, turn on the AC and plug all power sources. This allows any remaining charge to dispel from the interior components, clears out any errors, and provides the system a clean start.

After following the above steps, hopefully, your AC will work correctly.

Is Your Air Conditioner Unit not Working Still? Get Professional Help

If you have tried all the above-mentioned ways to reset your air conditioner yourself and your AC is still not working or running correctly, don’t worry! You should contact a professional and reputed AC service provider to get instant help. The certified and skilled technicians can help you to solve your air conditioner resetting problem. Technicians will inspect your device, reset your AC system using specialized tools, diagnose underlying issues, and provide advice on other AC difficulties, ensuring your device functions as expected. Thus, you will get efficient, long-lasting AC repair service, with your satisfaction guaranteed.